90 Degree Adjustable Wall & Roof Clip Angle

Breather membrane is a vapour permeable and air tight breather membrane, designed for usein both fully supported and unsupported installations in tiled or slate pitch roofs.

Roofing shingles are made of asphalt -- a capable roofing material that construction and roadworks developers use. In turn, it can take so much pressure and strain despite being an alternative.

1 Inch Self Tapping Screw can be drilled, tapped and fastened, all in one swift motion, saving the time and effort that you would have had to put in otherwise.

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

The Truss Support Clip provides a positive connection between the valley truss and the supporting framing below. Installed on top of the roof sheathing, it eliminates the need to add a support wedge under the valley truss or to bevel the bottom chord to match the roof pitch.

Our Rhomboid connect parts are made of stainless steel,a whole die-casting molding structure,rust and corrosion resistance,strong toughness and load bearing,can use for long time.

The moment clips are designed to resist horizontal, torsional and vertical (uplift) loads. These clips are prepunched with a series of attachment holes for steel framing connections and a 1/2” anchor bolt hole for foundation connections.

The joist hanger provides a strong connection between a 2x6 floor, ceiling or deck joist and the header. Joist hangers install easily, eliminate the need for toe-nailing and are required by the building code in many areas.

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

The Stainless Steel Hex Washer Head Screws are strong, corrosion resistant and will support all of your projects. They are great for both indoor and outdoor use. The stainless steel is superior to regular steel and provides excellent rust resistance in water applications. Stripping a screw head is a thing of the past with our Hex Head screws. Put a socket on that impact or drill and fasten away!

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

The “T” shape Clip of hot rolled steel tee makes it favorable for applications where large loading bearing capabilities are a must. The top (Flange) provides compressive stress resistance while the vertical section (web) resists shear stresses and bending.

U-shaped Truss Support Clip is made of high-strength anticorrosive aluminum-zinc plating, which effectively avoids corrosion during construction and use, and increases the service life of light steel construction.