English
Origin of LGS Structure • It is derived from the construction technology of balsa wood structure and follows the construction method of 2*4 wood structure; • Using galvanized steel sheet with thickness of 1.0mm-2.4mm to roll cold-formed thin-walled steel skeleton; • The keel interval of the wall endurance structure (C-section steel) is 406mm or 610mm; • A variety of cladding materials are covered ...
Sample of Metal Stud Ceiling Framing Any interests or questions, welcome to visit BuildMart at www.buildmartmaterial.com.
Metal studs are cold-formed steel components used for framing basement and partition walls just as regular wooden apparatuses. They are mainly used to support non-load bearing walls. On the other hand, metal stud framing is the process of erecting walls and panes using cold-steel components. Metal stud framing has two major apparatuses – the stud and the truck. Heavy gauge metal studs are used in ...
What would be the difference if applying the same insulation material to wood framing and steel framing. What effect will be? These questions are becoming popular in the construction industry. This article compares the light steel structure and the wood structure with the thermal performance. The comparison showed that the commonly practiced method of replacing wood with steel stick-for-stick resu...
The designs of light gauge steel frame buildings are designed according to permanent building specifications just like in reinforced concrete buildings. Calculations are made according to the load required to be carried. In addition, since they are significantly lighter than reinforced concrete, they are much less exposed to earthquake loads. This significantly increases the earthquake resistance ...
Using different types of structures for dream houses is crucial to the choice of a contractor. A house or building is a big investment that requires a lot of planning to avoid any regrets. Doing some research in advance is essential in helping you decide between Light Gauge Steel or others for your next construction project. Building solid structures is especially important in areas prone to ...
In recent years, the steel structure villa began to be concerned and sought after, especially by people who like various European styles and promote fashionable environmental protection, become the main followers of light steel frame construction. The steel structure house is an urban recyclable building structure. It can not only be recycled, reused, and reduce the emission of construction waste ...
Opportunities for light steel framing villas 1、The urbanization process continues 2. The tourism and holiday industry is looking up 3. Ageing is on the horizon Factors driving the industry I. Shortage of workers and increasing labor costs Compared to traditional construction methods, the use of integrated assembled buildings greatly enhances production efficiency and reduces manpower requirements;...
A light steel villa is an industrialized building model where certain parts of the building are produced and transported in a modern factory and then transported to the building site for assembly. Since the main frame is light steel building structure material with over 80% recycling rate and the interior and exterior decorative materials are environmentally friendly, the construction process prod...
Room B401, No.278, Haijing Road, Haicang District, Xiamen City, China
+86 (592) 6084611
© Copyright 2024 Buildmart (Xiamen) Building Material Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported
