• May 12. 2021

There are many types of roofs to choose from, and there are many materials to choose from, such as asphalt shingle, cedar, metal, wood chips, rubber, copper, slate, and ceramic tiles. However, most roofs are constructed using asphalt shingles. According to data surveys, the most Asphalt shingles are also popular. Let’s take a look at the top 5 reasons why asphalt shingle roof installations are mos...

• October 29. 2021

There has been considerable debate over the development of simplified calculation methods for thermal resistance (R-value) and thermal transmittance (U-value) for light steel frame constructions that designers can easily use. Such simplified methods have presented a particular difficulty for light steel framing constructions as compared with many other forms of construction because they must accom...

• February 21. 2022

Whether you’re building a new home or doing a major overhaul of your current home’s roof, both flat and sloped roofs have their advantages and drawbacks. We break down the key factors to consider when choosing between a flat roof and a sloped roof. What’s the Difference Between a Flat and a Sloped Roof? As their names indicate, a flat roof is a flat surface, whereas a sloped roof is angled&nb...

• March 29. 2022

The cost of whole steel frame structures under RMB150,000. Assembly Time: 6 workers finish assembly within 7 days. BUILDMART building material special-shapesteel framingstructureadopts special-shaped &top hat beams, which are between light steel and heavy steel structure, which are connected by standard bolts and self-tapping screws. Together with profiled sheet, form a plate-beam-co...

• April 02. 2022

How is Cold-Formed Steel Framing Made? The production of cold-formed steel begins with the production of raw steel. This is made by combining iron ore or scrap steel with carbon in a furnace. Then, cold-formed steel framing is made from sheets of this structural steel. These sheets are fed through roll-forming machines, which turn the steel into c-shaped sections or other shapes (depending on the ...

• April 11. 2022

CFS and structural steel differ significantly in terms of their production and framing methods. However, CFS is widely recognized for producing less waste, being light in gauge, and being cost-effective. Structural steel is carbon-based. Increasing the steel's carbon composition means it can be adjusted to have both strength and low elasticity. Typically, the carbon content of steel is adjusted de...

• April 20. 2022

Origin of LGS Structure • It is derived from the construction technology of balsa wood structure and follows the construction method of 2*4 wood structure; • Using galvanized steel sheet with thickness of 1.0mm-2.4mm to roll cold-formed thin-walled steel skeleton; • The keel interval of the wall endurance structure (C-section steel) is 406mm or 610mm; • A variety of cladding materials are covered ...

• May 05. 2022

Sample of Metal Stud Ceiling Framing Any interests or questions, welcome to visit BuildMart at www.buildmartmaterial.com.

• May 16. 2022

Metal studs are cold-formed steel components used for framing basement and partition walls just as regular wooden apparatuses. They are mainly used to support non-load bearing walls. On the other hand, metal stud framing is the process of erecting walls and panes using cold-steel components. Metal stud framing has two major apparatuses – the stud and the truck. Heavy gauge metal studs are used in ...