• December 02. 2021

There are two main mechanical characteristics of light-frame buildings, namely load sharing and repeated and compound effects. Load sharing means that all components in the system have both division of labor and cooperation, and work together to bear the load. Even if a component fails-it is not able to bear the part of the load it should bear, it does not matter. The neighbors will take the lead ...

• December 20. 2021

1. Rafter roof This is the most common light gauge steel roof structure, mainly used for complex roof shapes. The rafter roof can be divided into: ■Rafters and pillars (picture 1 and picture 2) This is the most common LGS roof structure, mainly used for complex roof shapes. Picture 1 Picture 2 ■Rafters and restraint joists (pictures 3 and 4) Picture 3 Picture 4 This kind of light gauge steel roof ...

• January 05. 2022

Caledonian Prefab House / LGS Building starts work on £121 million contract for phase one of Defence College of Technical Training Caledonian Prefab House / LGS Building, part of the Caledonian Group, has commenced work on a £121 million Ministry of Defence (MoD)/Defence Infrastructure Organisation (DIO) contract for Hercules, a joint venture between Kier Group and Balfour Beatty. The project...

• March 01. 2022

This project is for a post located in China. The main body is heavy structure, and the walls are LGS ( Light gauge steel ). Look, the tower crane is working. Our Basement. Our Roofs. Our Heavy Structure Body Finished Interior Decorating Doors & Windows Exterior Wall Finished

• April 11. 2022

CFS and structural steel differ significantly in terms of their production and framing methods. However, CFS is widely recognized for producing less waste, being light in gauge, and being cost-effective. Structural steel is carbon-based. Increasing the steel's carbon composition means it can be adjusted to have both strength and low elasticity. Typically, the carbon content of steel is adjusted de...

• April 20. 2022

Origin of LGS Structure • It is derived from the construction technology of balsa wood structure and follows the construction method of 2*4 wood structure; • Using galvanized steel sheet with thickness of 1.0mm-2.4mm to roll cold-formed thin-walled steel skeleton; • The keel interval of the wall endurance structure (C-section steel) is 406mm or 610mm; • A variety of cladding materials are covered ...

• September 06. 2022

The designs of light gauge steel frame buildings are designed according to permanent building specifications just like in reinforced concrete buildings. Calculations are made according to the load required to be carried. In addition, since they are significantly lighter than reinforced concrete, they are much less exposed to earthquake loads. This significantly increases the earthquake resistance ...

• October 09. 2022

Opportunities for light steel framing villas 1、The urbanization process continues 2. The tourism and holiday industry is looking up 3. Ageing is on the horizon Factors driving the industry I. Shortage of workers and increasing labor costs Compared to traditional construction methods, the use of integrated assembled buildings greatly enhances production efficiency and reduces manpower requirements;...

• November 03. 2022

The challenge to architects is how to meet the needs of modern construction in an ecologically optimal way. After making a large number of on-site investigations, architects completed the structural transformation and integrated system layout with extremely minimal intervention, so that the light steel frame building could be connected with the surrounding forest and water system smoothly. There a...