English
SPC Composite Flooring has an excellent waterproof and moisture-proof effect and also has characteristics such as anti-mold. This solves some of our worries about the traditional wood flooring that is afraid of water and moisture.
Payment:
L/C,T/TProduct Origin:
ChinaColor:
Multi-ColorShipping Port:
XIAMENLead Time：
Within 3 weeksGoods Stock:
1000000Wear-resistant Fire prevention Plastic Core SPC Plastic PVC flooring
The surface of High quality spc flooring has a special transparent wear layer, so this type of flooring has strong wear resistance and impact resistance, not easy to damage, and at the same time has a good waterproof function.
1.100% waterproof & environmental protected.It can be soaked into water for years(zero expansion).
2.Abrasion resistance,anti-skidding(nonskid when being wet) .
3.Easy to clean(washed by water or detergent) .
4.Easy to install (click system over 4 sides,without using keels,nails,glues,special kits or installation skills) .
5.Good feeling (warmer than ceramic tiles) .
6.Mold proofing,worm preventing,anti-corrosion,high temperature resistance,and high precision link .
7.Radiant heated flooring,it won't expanse or contract or odorless.
| Safety Criteria | Standard | Value | ||||||||
| Density | ASTM D6111-2013a | (2+/-0.05)g/cm3 (no backing) | ||||||||
| Modulus of rupture | EN310 | ≥ 18 Mpa | ||||||||
| Deflection | ASTM F1304-18 | Th = 4.0 mm,Δsmin ≥ 15mm,Fmax ≥ 50N | ||||||||
| Flatness at room temp |
ISO 24337 23 ± 2 ºC - full size |
Concave / Convex ≤ 0.5 mm | ||||||||
| Curling after exposure to heat |
ISO 23999 / ASTM F2199 80ºC / 6h, recondition for 24h - 300mm * 300mm |
Concave / Convex ≤ 0.8 mm | ||||||||
| Dimensional stability after exposure to heat |
ISO 23999 / ASTM F2199 80ºC / 6h, recondition for 24h - 300mm * 300mm |
DS ≤0.10% | ||||||||
| Peel strength / Film key |
EN431 Speed - 100mm / min ASTM D903 Speed - 305mm / min |
≥ 8.0 kgf / 50 mm | ||||||||
| Residual indentation | ASTM F1914 | average ≤ 0.18mm | ||||||||
| Castor Chair Resistance |
NALFA LF 01-2011 Section 3.9 castor wheel: single-wheel polyamide |
no visible damage after 25000 revolutions - without backing no visible damage (surface and click) after 4000 revolutions - with 1.0mm IXPE backing |
||||||||
| Coating adhension | ASTM D3359 | less than ≤1% area removed | ||||||||
| Wear resistance |
ASTM D4060 CS-17, with 1000g load per wheel |
≤ 0.015 g/ 1000R | ||||||||
| Scratch resistance | ISO 1518-1 | weight ≥2500g | ||||||||
| Microscratch resistance procudure A | EN16094 | MSR - A1 to A2 | ||||||||
| Locking strength |
ISO 10582-2017 Annex D Short side Speed - 100mm/min |
≥ 15.0 kgf / 50 mm | ||||||||
| Microscratch resistance procudure A | EN16094 | MSR - A1 to A2 | ||||||||
| Phthalates | ASTM D7823 |
BBP,DBP,DEHP,DNOP,DINP,DIDP,DEP,DPRP,DIBP,DHP, DCHP,DNP,DMP,DIOP,DPP,DNHP,DOTP - not detected |
||||||||
| Heavy metals | ASTM F963 |
|
| Product Name | SPC Flooring | Application | Hotel, apartment, school, residential and commercial |
| Brand | BUILDMART | Colour | Multiple options available, customizable |
| Thickness | 4-8mm | Backing | IXPE |
| Surface Treatment | UV coating | Function | Waterproof/fireproof/wear-resistance & sound proof |
| Size | 1220/1530*230MM | After-sale service | Technical support, Onsite Training, Onsite Inspection, Free |
*Note:
Low MOQ, plank pattern, logo and color can be customized, OEM & ODM accpeted.
We have obtained the EMS, QMS, OHSAS and CE certification for the stone composite floorings.
Q: How do you guarantee the quality of your products?
Each step is strictly controlled by the QC team to make sure all our products turn out great
Q: How about the delivery time?
Lead time 30-35 days since receipt of 30% T/T deposit payment for container order.
Q: Do you offer other products besides PVC vinyl floor?
Yes! We can also provide other different floor types,such as self-adhesive,quartz sand tile,roll floor etc.
And floor accessories:glue,skirting,underlay etc.
Q: Do you charge for the samples?
Yes, free samples can be provided, but the sample freight is to be covered by the customer.
Q: Can you produce according to customers' design ?
Sure, OEM service is available.
Q: What is the average lifetime of a SPC vinyl floor?
Vinyl flooring generally lasts 15-25 years for commercial building and 25-35 years for residential building. However, the lifetime of vinyl flooring varies widely because differences in the quality of the product greatly impacts its longevity.
Welcome to contact us at any time if you have any requir !
Previous:
Waterproof spc rigid core stone plastic composite flooringNext:
Rigid Core Waterproof Stone Composite Luxury Vinyl SPC FlooringIf you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
New Products
Easy Installation Waterproof Spc Vinyl Flooring Click Lock System Skirting Read More
3 Stories House Design Heavy and Light Steel Framing Villa Hurricane Resistance Wind Resistant 150mph in Florida USA Read More
China Modern Stable Prefabricated Light Gauge Steel Framing House Easy Installed Read More
Modern Luxury Design 2 Story Prefab Light Steel Villa House Read More
lightweight steel framing House Light Steel Prefab House Read More
Light Steel Frame Structure Design Suit for Residential Home Luxury Villa Hotel Read More
Fully Assembled Modular Light Gauge Steel Framing Villa Read More
Light Steel Frame Prefabricated Steel Building Prefab House Read More
Breather membrane is a vapour permeable and air tight breather membrane, designed for usein both fully supported and unsupported installations in tiled or slate pitch roofs.
Roofing shingles are made of asphalt -- a capable roofing material that construction and roadworks developers use. In turn, it can take so much pressure and strain despite being an alternative.
1 Inch Self Tapping Screw can be drilled, tapped and fastened, all in one swift motion, saving the time and effort that you would have had to put in otherwise.
All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.
Durable right angle clamp, made of premium aluminum alloy die-casting material. Allows two wood block of different thicknesses to be joined at a 90 degree angle.
The Truss Support Clip provides a positive connection between the valley truss and the supporting framing below. Installed on top of the roof sheathing, it eliminates the need to add a support wedge under the valley truss or to bevel the bottom chord to match the roof pitch.
Our Rhomboid connect parts are made of stainless steel,a whole die-casting molding structure,rust and corrosion resistance,strong toughness and load bearing,can use for long time.
The moment clips are designed to resist horizontal, torsional and vertical (uplift) loads. These clips are prepunched with a series of attachment holes for steel framing connections and a 1/2” anchor bolt hole for foundation connections.
The joist hanger provides a strong connection between a 2x6 floor, ceiling or deck joist and the header. Joist hangers install easily, eliminate the need for toe-nailing and are required by the building code in many areas.
All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.
All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.
The Stainless Steel Hex Washer Head Screws are strong, corrosion resistant and will support all of your projects. They are great for both indoor and outdoor use. The stainless steel is superior to regular steel and provides excellent rust resistance in water applications. Stripping a screw head is a thing of the past with our Hex Head screws. Put a socket on that impact or drill and fasten away!
All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.
The “T” shape Clip of hot rolled steel tee makes it favorable for applications where large loading bearing capabilities are a must. The top (Flange) provides compressive stress resistance while the vertical section (web) resists shear stresses and bending.
Room B401, No.278, Haijing Road, Haicang District, Xiamen City, China
+86 (592) 6084611
© Copyright 2024 Buildmart (Xiamen) Building Material Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported
